How to Edit the Draw Point on a Custom Truss Family
New Truss+: Auto-generate complex roof truss systems in Revit
The new enhanced extension for Truss+ is here! In addition to automating complex Woods and Metal Truss systems, the latest versions of AGACAD'due south Wood/Metal Framing Roof are more than convenient and flexible, thanks to additional options for creating and freely modifying various roof truss layouts and individual truss structures.
Moreover, Truss systems can be created for Roofs with dissimilar Hip End and Side Pitches, and more Truss Overhang framing variations will be available for your projects.
Permit'south await through the latest updates one-by-one.
i. GENERATE AND MODIFY 3D GRIDS CREATED Past One ROOF LINE
Using Truss+, nosotros tin can build full, circuitous truss systems at once with the configurable 3D grid, skipping the limited and time-consuming standard process of inserting Revit® truss families.
Working with 3D Grids is now much easier. Whereas in the by nosotros had to select multiple symbolic model lines in order to generate the 3D Grid, now if the Roof is created by the "Selection Walls" command, then we can generate the Grid by selecting only the Roof and one symbolic line.
Firstly, click "Insert Truss Arrangement Filigree by i Roof Line", and then select the Roof, the symbolic line, and cull a System Grid Type:
All pitches, overhangs, setback, and other values were adapted automatically, so you don't have to summate anything.
Beforehand, after generating the grid, nosotros merely could modify it by using the part "Modify Truss System Grid", merely now, we can also practice that by only irresolute the "Case parameters".
In this case, I removed the "Set Main Roof" tick marking then that I could insert the Valley Gear up Filigree for this system subsequently. In this example, I've added iii plies for the Girder:
Finally, I selected the grid and generated the Valley set Grid:
I used the aforementioned "Insert Truss System Grid by ane Roof Line" function to generate other grids in this roof. For gable ends, I kept the "Set Main Roof" tick mark on and generated the "Last Common Truss" so that I could later automatically assortment trusses throughout the roof:
That'south information technology! All 3D Grids accept been created:
ii. GENERATE TRUSSES Past 3D GRIDS and Auto-ARRAY THROUGHOUT THE ROOF
After automatically generating Trusses on the created 3D grids, we can automatically array them throughout the roof:
Afterward selecting the Truss and using "Re-create/Assortment/AutoArray Roof/Flooring Truss" and selecting "Car Array", Truss+ automatically calculates that 5 trusses are needed to be arrayed to the left of the selected truss, to the "Concluding Common Truss" generated before:
Finally, afterwards auto-arraying trusses for both sides of the roof, we can automatically array them in the middle by selecting two trusses and "AutoCopy Two Trusses" – in the middle:
That's it!
three. Complex TRUSS ROOF FRAMING
I of the master characteristics about the new Truss+ is the possibility to combine the old method, which lets u.s.a. "Insert Truss System Grid past Roof Lines" and the new method which tin "Insert Truss System Grid past one Roof Line". That way we can create especially complex truss systems for different situations:
Some other case:
Trusses generated:
4. CREATE UNIQUELY SHAPED, PARAMETRIC TRUSS FAMILIES Fifty-fifty FOR MULTIPLE ROOFS
Truss+ makes possible the creation of uniquely shaped, parametric truss families based on model lines and even multiple roofs (in the past, we could create them only for one continuous Roof modeled in Revit) for firsthand use in your projects using the Truss Builder.
As you may already know, Truss+ RT has a built-in Truss Builder that allows the user to depict a custom truss blueprint and utilise it in a dissimilar project.
Afterward drawing the Model Line at the right level, we can select information technology and use "Create Roof Truss Blazon from Model Lines":
The Truss Builder window will open, with a scheme created based on the Model Line (Lesser Chord) and the shape of Revit Roof (Peak Chord) and we'll exist able to sketch a custom spider web:
Result:
v. MODIFY TRUSSES USING THE TRUSS BUILDER
From now on, the Truss Architect tin be used not merely for new creations but also for modifications. Automatically generated trusses can exist pushed to the Truss Builder, and from there, we tin pattern the desired web.
Just select a Truss and apply "Change Roof Truss Blazon":
The Truss Architect window will open, with a scheme already created based on the Tiptop and Bottom Chords of the selected Truss. In that scheme and we'll be able to sketch a custom web:
Result:
vi. Concluding TRUSS ROOF
Truss+ automatically converts a Step-Down Truss Arrangement to a Terminal Organization, based on the span:
7. REPLACING TRUSSES
In example you lot demand to supersede a Truss that has already been generated in your roof, information technology will be really quick and piece of cake with the new versions of Truss+.
The procedure is actually simple: Y'all'll exist able to select ane Truss or Trusses from the Same Group, Identical Trusses from the Same Group, or Trusses from the Aforementioned Grid. Then, replace them automatically by choosing the needed Truss from the Database or the Model:
8. OVERHANG FRAMING
Lastly but not to the lowest degree, in the latest versions of Woods Framing Truss+, you'll have more than truss overhang framing variations to choose from:
SOLUTION
Uniform with Autodesk® Revit® 2017, 2018, 2019
The definitive solution for wood/metal framing with Revit
Peak Revit users phone call AGACAD's Wood/Metal Framing Suite the most powerful and flexible BIM software on the marketplace for constructions with multi-layer timber-frame or metal-frame walls, floors and roofs. That includes prefabricated panels, rafters and trusses, and dandy SIPs, CLT and post-and-beam solutions.
Advanced automation and born best practices help BIM professionals brand optimal choices, movement much faster, and avoid errors at every stage – from blueprint and documentation to fabrication and construction.
It's like shooting fish in a barrel to rapidly batch add together, modify or mark just the right elements or parameters, distribute details, flexibly manage openings and connections, and find clashes. Frames dynamically update and adapt, ensuring that shop drawings and cut lists are always accurate.
Source: https://agacad.com/blog/new-truss-auto-generate-complex-roof-truss-systems-in-revit
Post a Comment for "How to Edit the Draw Point on a Custom Truss Family"